剛開始在畫圖時，一定會對於Autocad單位設定感到困惑。其實Autocad的單位不管是mm.cm.m.inch等，都是以繪圖者當初在繪圖時繪製為準，而單位設定是用來插入圖塊、標註等的設定，故有時從別處來的圖面單位設定的單位與實際圖面的單位會不同。所以剛拿來的圖，上面若有標示的尺寸需量測後才能確定，與"單位設定"無關。
If you are a beginner of Autocad. You must to understand the "Drawing units" would not equal to the units in drawing. Because the "Drawing units" is setting for inserting block ,dimesion and so on. So
you get the drawing from anywhere you must confirm the units in drawing NOT in the "Drawing units".
If you are a beginner of Autocad. You must to understand the "Drawing units" would not equal to the units in drawing. Because the "Drawing units" is setting for inserting block ,dimesion and so on. So
you get the drawing from anywhere you must confirm the units in drawing NOT in the "Drawing units".
1. --> 2.
格式 --> 單位
紅色框線是常用的 修改成想要的後 確定
完成!!
Xsn 笑三納: Autocad--單位設定(Drawing Units) >>>>> Download Now
回覆刪除>>>>> Download Full
Xsn 笑三納: Autocad--單位設定(Drawing Units) >>>>> Download LINK
>>>>> Download Now
Xsn 笑三納: Autocad--單位設定(Drawing Units) >>>>> Download Full
>>>>> Download LINK KZ